5 Common Myths About Replacing A Window Handle You Should Avoid

Tips For Replacing a Window Handle

Changing your window handle is a simple project that can be completed in the at-home comforts of your home. Follow these guidelines to ensure a smooth and beautiful finish.

Remove the screw covers from your uPVC handle to reveal the screws. Then, measure the length of the spindle to ensure that you receive the correct size replacement.

1. Determine the Spindle Length

It's important that you ensure the correct size of the spindle when replacing the window handle. It could affect the tightness or looseness of the handle and whether the handle will lock properly into the window frame. The spindle is the metal shaft that connects to the handle and to the lock within the frame of the window. The spindle can be found in the standard cross-section of 8mm for industry or the more traditional versions of 9mm.  door handle repairs  is 8mm but this was not always the case so when buying a new handle it is important to check the dimensions.

The easiest method of measuring the spindle length is to remove the handle that is currently in place, this can be done by turning it into an open position and unscrewing the two screws (which could be hidden behind plastic caps that will need to be removed) which hold the handle. After removing the handle, take a measurement from the base of the handle to the end of the spindle. This will give you the measurement required to buy a replacement.

There are a variety of options when you are looking to pick the right window handle. From sleek chrome that fits in with a modern style, to traditional burnished bronze that looks great in restored Georgian rooms, or the more quaint Tudor Cottages with curled mongoose tail latches. There are many options, but the most important is to pick a style that matches your home.

Espag handles are generally fitted to uPVC windows and are identical in size, with 43mm centres (2 fixings). Cockspur handles are available in a variety of sizes, from 58mm to 62mm. Window handles made of Cadenza have distinct dimensions as they feature an bent blade that is used to operate a multi-point lock mechanism inside the window.

Another factor when choosing the best window handle is knowing which hand you require to use. This is determined by the hand you use to open the door. Inline Espag handles can be used with either left or right-handed windows. Cranked window handles are only compatible on windows that open in a single direction.

2. Remove the Handle

Whether the handle is damaged or worn out, a window handle that falls off can be a real pain. The good news is that you can replace a uPVC handle yourself. All you need is a few basic tools and some time to complete the job.

First, you must open the window, and make sure it's not locked. The next step is to remove the screws which hold the handle in position. Once the screw caps are removed, you will be able remove the handle.

The handle is attached to a spindle in the window frame. Based on the type it is secured by a screw or a pin. The most common handle types are inline Espagnolette handles and the cockspur handles. Both of these types of handles are used on casement windows, which includes aluminum windows. You can lock the handles with a key to stop unauthorised access from the outside. You can also lock the handles by turning them clockwise.

To remove the handle you'll need a screwdriver with a flat blade to remove the clip that holds the handle. Once this is released, the handle will slide off the spindle. Once the old handle is removed, you'll have to determine the length of the spindle to make sure that the new handle is compatible with this size.

Once you have the correct size, you are able to put the new handle in the correct position. It is important to ensure that the handle is properly attached and rotates in the proper direction (clockwise when the handle is open and counterclockwise if handle is closed). It is also important to check that it has not been fitted upside down.

Replace the cap screws. After you've completed this step, you should test the handle to make sure that it's working properly. You can also test the locking mechanism by shifting the handle from the unlocked position to the locked position and then back.

3. Take the Screws off

A uPVC window handle is an integral component of every home and is often the first thing to show signs of wear and wear and tear or damage. This can be caused by natural factors or through regular use, or deliberate damage by opportunistic criminals who might want to open a closed window to gain access to your property. However, a simple replacement can easily solve the problem and stop the issue from occurring again.

UPVC handles can also be difficult to remove when the locking mechanisms are not working properly. It's usually possible to resolve the issue by replacing the multipoint locking mechanism rather than the whole handle. This can help you save money.

After removing the old handle, you'll need to remove the screws that secured it. The screws are typically located on the inside of the base of the handle. You may need to use an screwdriver to do this, and it's crucial to not over tighten as this can cause the handle to become loose.

Then you will need to find the pins or screws that secure the handle. Again these are likely to be located on the inside face of the base of the handle. you will need to use an screwdriver or a pair of pliers to remove the screws. If you'd like to replace them, you can do so by replacing the screw caps and check the handle to ensure it works correctly.

When you're ready to install the new handle, simply align the spindle with the cut out in the window mechanism and screw it in place. Make sure that the handle is in the open position and that the screws are secured before replacing the screw covers should you wish to do this. Then you can enjoy the newly installed window handle. I hope this will enable you save money on window and door replacement services in the future. If you'd like to get assistance with this or any other aspect of your uPVC windows don't hesitate to get in touch with us.

4. Install the New Handle

The procedure of replacing a damaged window handle or updating it is simple and can be accomplished in just a few steps. The first step is to determine the kind of handle, take measurements of its spindle and identify the tools you'll need to complete the task. Safety is always the primary priority when working with windows and tools. It's also important to take your time and follow the steps with care to ensure that you have a functional handle that is safe to use.

The first step is to identify the screws that hold your current window handle in place. Then, remove these, whilst keeping an adequate grip on the handle itself to prevent it from falling and causing injury. Once the screws are removed, they can be placed in a secure location to be replaced in the future.

After removing the old handle, you are now able to put in your new one. It is essential that the handle is fitted perfectly to ensure that it is functional and secures the window in position. Then move the square metal bar on the handle into the window mechanism hole.

The final step is to replace the screws caps and test the handle to ensure it is working. If you're not satisfied with the outcome or if your window doesn't open and close as it should then the next step is to call our experts who will be able to assist you.

The majority of UK homes have uPVC Windows. This means that a lot of them will need to be changed at some point because of wear and tear or breakage. The procedure is simple and can be completed by anyone with a bit of experience in DIY. The most important aspect in the success of this procedure is to ensure that you're using a handle that is compatible with your existing window in terms of dimensions and style. If you're not sure what kind of handle you'll require, don't hesitate to contact our team who can provide you with the choices available.